Get PIN Code for Nissan Audi Alfa Vauxhall with Key Pro M8 key programmer

I tested Key Pro M8 key programmer successfully read out pin code for Nissan, Dodge, Audi, Alfa Romeo 159 as well as Vauxhall Astra J, etc. and in the following parts; I put their operation instructions and procedure, wish it helps.

1. Instruction on Key pro M8 programmer read pin code for Nissan
If you need to get pin code for Nissan, you need additional pin code calculator, Nissan super code software for old Nissan, Nissan Pin Code Calculator for newer car.

Question: How to calculate 2011 Nissan Cube Proximity with Nissan calculator?
Instruction: Firstly read a code from BCM, then input this code (for example:123AC) into the blank box under Nissan Cal software “SuperCode” , the pin code will display at the right corner, eg 9028 is the pin code in the following pictures.
nisssan pin code calculator-01
nissan pin code

2. How to use Key Pro M8 key programmer to get PIN Code for Audi?
1) Power on the key programmer m8 device. Come to the VEHICLE SELECTION menu and select vehicle make: AUDI
choose-the-vehicle
2) Select IMMOBILISER system
immobiliser

3) Select read pin code from AUTO (CLUSTER)
auto-cluster-3(2)

4) The system is trying to communicate, please wait patiently.
please-wait-4

5) The system will automatically read security PIN code.

ecu-identification-5

6) Go back to DIAGNOSTIC MENU, select ECU IDENTIFICATION
diagnostic-menu-6

7) Check the security pin code that already read by system.
read-pincode-7
3. How to use Key Pro M8 key programmer to get PIN Code for Alfa Romeo 159?
1) Well install Key Pro M8 software
2) Connect the ADC195 to the Blue BCM plug connector and its loom and the diagnostic socket
3) Connect MDC154 Dongle A with key pro m8 main unit
4) Power up the device. Select vehicle make: ALFA
key-pro-m8-alfa-1
5) Select vehicle model: 159
key-pro-m8-alfa-2
6) Select Read PIN CODE
key-pro-m8-alfa-3
7) Switch ignition OFF
M8 key pro will display the pin code reading way—via OBD or Y-cable. Try option 1 first, if option 2 fails then try option 2.
Select option 2 by clicking on 2 button then press the tick mark
key-pro-m8-alfa-4
8) Switch ignition OFF
9) Insert Key, switch ignition ON
10) The key pro m8 auto key programmer will read and display the car pin code.
key-pro-m8-alfa-5
11) Back to the main menu to program key or exit the program.

4. How to use Key Pro M8 key programmer to get PIN Code for Vauxhall Astra J?
Instruction:

Well install key pro m8 software
Connect m8 key pro diagnostic locksmith tool main unit with vehicle via OBD socket
Power on the device
Come to main menu. Select vehicle make: GM/Opel
key-pro-m8-read-pin-code-1
Select vehicle region: EURO (European)
key-pro-m8-read-pin-code-2

Select vehicle model: Vauxhall Astra J
key-pro-m8-read-pin-code-4

Select “IMMOBILIZER” from the function list
key-pro-m8-read-pin-code-3

Switch ignition to ON
Wait the MVP Key Pro M8 is communicating with vehicle module, and finally display detail vehicle information: VIN number and PIN CODE number.
key-pro-m8-read-pin-code-5

Switch ignition OFF. Start to program new keys or exit the Key Pro M8 software program.
http://www.worldobd2.com/wholesale/the-key-pro-m8-auto-key-programmer-3383.html

 

Copy Protected by Chetan's WP-Copyprotect.