How to install driver for Z-TEK USB 1.1 to RS232 convert cable

It’s aimed to help install driver and set up com port for the Z-TEK USB 1.1 to RS232 convert cable.

First, you need a working Z-TEK USB 1.1 to RS232 convert cable

z-tek-usb-to-rs232-convert-connector

Then, download Z-TEK driver though http://www.wobd2.com/

 

Finally, here goes to the Z-TEK driver installation…

Insert the disk on the laptop

Open Z-TEK (E:) disk and unzip ZE394.zip to Desktop

Open the ZE394 folder on Desktop,

Then =ia+ (the first folder)-> Windows All-> WinXP_vista_7.0_x86_x64

Open the setup E1F1_ZTEK_1912_20140518

Install Z-Tek USB-to-Serial on PC

install-driver-for-z-tek-usb-to-rs232-cable-1

Click on Next to go on

Successfully installed Z-Tek USB-to-Serial, click on Finish

install-driver-for-z-tek-usb-to-rs232-cable-2

 

Wizard help to install software for Z-Tek USB-to-Serial com port

install-driver-for-z-tek-usb-to-rs232-cable-3

Select “install…automatically”, then click on Next

Finished!

install-driver-for-z-tek-usb-to-rs232-cable-4

 

Open Computer management

Find out Z-Tek USB-to-Serial com port (it’s com6 now)

In the properties, go to Port settings-> Advanced…-> setup Com port number: COM2

 

install-driver-for-z-tek-usb-to-rs232-cable-5

install-driver-for-z-tek-usb-to-rs232-cable-6

install-driver-for-z-tek-usb-to-rs232-cable-7

Then click on OK, OK

Click for scanning Plug and Play compliant hardware…

It’s Z-Tek USB-to-Serial com port (COM2) after setup

install-driver-for-z-tek-usb-to-rs232-cable-8

Then go to properties again

Again, go to Port settings-> Advanced…-> setup Com port number: COM7

install-driver-for-z-tek-usb-to-rs232-cable-9

Then click on OK, OK

Click for scanning Plug and Play compliant hardware…

This time, it’s Z-Tek USB-to-Serial com port (COM7)

install-driver-for-z-tek-usb-to-rs232-cable-10

 

Now, you can use your Z-TEK USB 1.1 to RS232 convert connector at ease.

 

 

 

 

 

 

 

 

Copy Protected by Chetan's WP-Copyprotect.