How to tell if your MINI VCI is Xhorse cable or not?

I bought 2 mini vci j2534 cables with Tecshtream Ver. 10.10.018 CD last week from a site (worldobd2.com) claiming to be an authorized “Xhorse” dealer. That one works on both my 2002 Prius ISO9141 (with 22 pin connector) and a 2009 Camry Hybrid CANbus (with 16-pin diagnostic connector).

I used to buy one non- Xhorse Techstream cable, it worked too. But I failed to get it worked onK-line Toyota on Win 7 64-bit operating system. The second xhorse cable runs perfectly on Win XP, Win 7 32 bit/64 bit Virtual PC on Intel based laptops.
toyota-techstream-cable
How to tell if your J2534 mini vci cable is Xhorse brand?

Firmware is king.

X-horse company developed this MINI VCI from Toyota Techstream software. There are 2 versions of Mini VCI; firmware ver. 2.0.1 and 1.4.1. My friend got the later and reported has no K-line signal.

My both two Xhorse mini vci interfaces come with firmware V2.0.1 (not V1.4.0 or higher v2.0.4)
The xhorse v2.0.1 cable 100% works with all modern Toyotas (K-line and CAN BUS) except you get no L line support for flashing ECUs. It will definitely no do. This is tested by most of Toyota owner, me included.

Firmware PCB Layouts, parts are well soldered and connected.

mini-vci-techstream-cable-pcb-1

mini-vci-techstream-cable-pcb-2

More Questions

How to Solve Mini vci j2534 failing

Please Chat wih www.worldobd2.com Customer service

If you need, here is free TIS Tecshtream 10.10.018 software to load:
http://down.worldobd2.com/toyota-techstream-10.10.018.zip
Here is a perfect document on installing Ver.10 on Win 8.1
http://www.ft86club.com/forums/showthread.php?p=1920724

 

Copy Protected by Chetan's WP-Copyprotect.