(02/06/2016) JMD Handy baby auto key programmer has been updated to the latest version 6.1.0 with the following new features:
– copy 4D70-dst80 （KIA and Hyundai）
– chip transfer
– more types of chips generated
– more detail information about chips
note：we are sure Ford(80bit) which made in China can be copy, but not sure Ford in all the countries can be copy, so it may decode fail. Locksmiths from Europe success in copying Ford(80bit)
So how to update handy-baby car key copy to 6.1.0 version?
You watch the video to update handybaby:
Also, follow the instruction below:
Free download handy baby 6.1.0 update file
Unzip handy baby 6.1.0
Connect handy baby device to PC
Start the device
Found new hardware wizard:
select Install … (Advanced), then Next
Select Include this location in the search, then Browse Desktop/ USB Driver, then OK
Wizard searches CP2102 USB to UART Bridge Controller, then Next
Software for Silicon Labs CP210x USB to UART Bridge installation success, Click Finish
Open Computer management
Select Device Manager->Ports (COM & LPT)-> Silicon Labs CP210x USB to UART Bridge (COM5)
Open handy baby 6.1.0 update tool on Desktop
Select the English language
1- with the palm-sized data cable to the computer
2- do not connect more than one palm-sized
3- the upgrade please be patient
4- the software does not prompt all the update is complete, do not disconnect the cable!
Restart Handybaby car key copy, then Updating…
All updating successfully!
Now your handy-baby is used with v6.1.0 software.
Now, you can use handy baby to …
1.Copy transponder:46/4D/4C/13/some of 48 transponders.
2.Write data to transponders:46/48/4D/4D+/8A.
3.Identify transponders: 11/12/13/40/42/44/46/ 47/4C/48/61/62/63/64/65/67/68/6A/6B/70/71/72G/83/8A.
4.Generate 4D transponders:61/62/63/65/67/68/69/6A/6B/71.
5.Generate vice 48 to fixed 48 transponder.
6.Copy fixed transponders:46/4D/4C.