These days, the Benz ECU renew cable is quickly popular among ECU tunners since it meets the needs to renew BENZ ECU by connecting to any of these tools: VVDI MB tool, vvdi, kess v2, ktag, MB KEY OBD2, NEC57, but not all are ok, the ecu flashing tools have to support CAN protocols and cover these ECU types: CR3.XX, CR4.XX, CR5, CR6, CR60.XX, SIM271DE2.0, SIM4LKE, SIM271KE2.0, CRD.11, CRD2.XX, ME9.7,
How to connect Benz ECU renew cable to VVDI MB tool?
How to renew Benz ECU step by step?
Take example: ME9.7:
– connect to VVDI with adapter and power through OBD
– read data
– get erase pass
– Save data (backup)
– Renew – success
Now you can initial startup in DAS/Xentry, have there 2 possibility…with data from old ECU or without… then online
By following the above steps, ECU renewed, and put into car made adaptation works good. Car starts.
To get erase pass ONLINE WITH DEVICE VVDI MB tool, after reading data ECU (with vvdi mb)
pin connection for ME9.7 MB
ECU renew cable test ok on:
Renew (used) ISM in w164 and w221 ok, when is the ISM unit in 100% condition and not broken.
Renewed 10 pcs of used 722.9 ETC board (7-gearbox module) version VGS_73 or like as “3” with VVDI MB tool and ONE piece assigned to the car using MB-SCN online access.
More Product information Please Search: (World OBD2 Auto Diagnostic Tool)
Author: WOBD2 www.worldobd2.com