How to Use Porsche PIWS2 Tester II V15.1

Porsche PIWS2 Tester II PIWS2 15.01 with multilanguage is the latest professional tester of high quality for Porsche,with powerful functions,full access.
PIWIS II-language setting
Choose the language you need.
PIWIS TESTER II -car model
Choose your car model.

Loading ODX data…
Initializing user interface (Diagnostic application starting. )
control unit section
Select control unit and continue to control unit search with [F12] when you see the interface. Then click “NEXT” at the bottom right corner.

Create a VAL? Yes with [F12] no with [F11]. Click “NEXT”.
airbag-gateway-DME-..
Click “NEXT”, please.

Changing display…
The model line would not be determined. Please check whether the vehicle belongs to model line Cayenne. Click “NEXT”
Creating vehicle analysis log…Click “NEXT”
check chassus number and correct
Check the chassis number and correct if necessary.
select log type
Select log type and confirm with [12].

Then the software will write vehicle analysis log
searching control unit
Click the control unit. Then turn to the “Fault memory” page.
clear all or selected warning-event entries
Clear all or selected warning-event entries with [F8]. Then turn to “Actual values input signal” page.
Selcet the group you want to display and continue
Select the group you want to display and continue
go on select more values to read-1
go on select more values to read-2

Select values and press [F12] to read the selected values.

Switch to “Actual values input signal” page with [F11]. And selected more values to read current actual values..
go on select more values to read-3

go on select more values to read-4
go on select more values to read-5
go on select more values to read-6

After reading all the current actual values, switch to “Coding adaptations”.
Choose “Manual coding” and click “NEXT” to enter 17-character VIN. Then go on “NEXT”.
the value cannot be changed
You will be told that “The value cannot be changed”, and you need to click “NEXT” to change values..
change values
Change values of S35 – LONG OIL LEVEL PROBE PULSE 2and continue.
select a value from the list
select a value from the list-all
Select a value from the list and you will get the latter diagram.

The software will be going coding in process. If coding was not completed successfully, please press [F12].
select coding mode
Select coding mode to continue.

Again, you will be told that “The value cannot be changed”, and you need to click “NEXT” to change values..
change values-SM5
Change values of SM5 – DUEL MARKET B and continue.
select a value from the list-SM5
DME-coding was not successfully
Select a value from the list and you will be told that coding was not completed successfully.

Turn to “Programming” page, and choose “Automatic programming” to continue.
Then you will read the control unit and total duration for programming and coding.
Click “NEXT” in the campaign.

Turn to “Maintenance repairs” page.
repairs- short test
observe preconditions
Select a function to observe prececonditions
select system test
Select system test.

Then turn to “Maintenance repairs” page and choose “Oil filling” to continue.
oil filling-observe information
Observe information about oil filling.

Next, choose “Adaptations” on the page of “Maitenance repairs” to observe information about adaptation.
select adaptation
Continue to choose “Kickdown adaptation”, and then back to “Extended identifications” as follows:
extended identifications
Turn to “Overview” page and you will find the control unit search has been completed.
Finally, select the control unit to terminate application.

All above is about how to use PIWS2 Tester II V15.1 with CF30 laptop for Porsche.

Copy Protected by Chetan's WP-Copyprotect.