JLR SDD V142 DA-VINA 2534 J2534 installation instruction for you

Good news!! JLR SDD V142 DA-VINA 2534 J2534 installation instruction for you all !!

1.Open “computer” > “DVD Drive”> “SDD 142.00_FULL”.
Choose the language you need.
The software will come to the “Prepare Setup” interface.
SDD_142.00 will be installed and please click “Next” and accept the agreement.
Tick on the square (I have read and understand this firewall compatibility) to continue.
Choose OK to navigate to the system information page.
Go to “Next” to install SDD_142.00.
Then you will see a “Setup Status” interface.
Please choose “Yes” here.
The application is installed.
Choose “Next” and you will see an icon of Navigation Program… on the desktop.
Click “Next” continuously to install, MOXA UPort 1110/ 1130/ 1150 Windows driver.
Be installing the new software installation.
Complete installation of SDD. And one icon “JLR SDD” appeared on your desktop.
Click “Finish” and then restart your computer.

2.Open “computer” > “DVD Drive” to choose the first “VDF_JA_142”.
Again, choose the language you need.
Click “Next” to finish VDF_JA installation.

3.Open “computer” > “DVD Drive” to choose the second “VDF_JV_142”.
Choose the language you want.
Go to next.
Complete VDF_JV installation.
Restart your computer after installation.

4.Open “computer” > “DVD Drive” to open the first “VDF_LA_142”.
Choose the language you want.
Go to next.
Complete VDF_LA installation.
Restart your computer after installation.

5.Open “computer” > “DVD Drive” to open the second “VDF_LV_142”.
Choose the language you want.
Go to next.
Complete VDF_LV installation.
Restart your computer after installation.
(the same like what you did for the first “VDF_LA_142”)

6.Open “computer” > “DVD Drive” >”SDD_142.01″ for installation.
Choose OK to install SDD_142.01.
Be installing SDD_142.01.
Restart your computer when you complete updating SDD to the version 142.01.001.

7.Open “computer” > “DVD Drive” >”SDD_142.02″ for installation.
Choose OK to install SDD_142.02.
Restart your computer when you complete updating SDD to version 142.02.001.
(the same as what you did for SDD_142.01)

8.Open “computer” > “DVD Drive” >”SDD_142″
Choose OK.
Waiting for additional pinpoint test.
Finish the installation of additional pinpoint tests.

9.Open “computer” > “DVD Drive” >”Driver”>”setup”
Tick on the little square. (i have read and accept the license items)
Microsoft Visual C++ 2010 x86 Redistributable is installed.
Click “Next” on the DA J2534 software interface.
Close the interface when the installation of DA J2534 is completed

10.Right click “computer” to choose “manage”. Then to enter the interface.
Choose “Device Manger”> “Ports (COM & LPT)”> “USB serial port (COM4)”.

11.Open “JLR SDD” for network connection.
Finish the dealer information.
Preceed with SDD.
Click to save changes.
Start diagnosis.
Click to choose this session type.
Do the symptom selection.
Renew data collect for this module.
Then click “Diagnosis” on the bottom.
Again, do the symptom selection.
Close the interface.
Stop application.

12. Open “computer” > “DVD Drive” to open “DFStd_KEY”.
Minimize the file.

13.  Open “computer” > “DVD Drive” to open “DFStd”.
Copy the words from “DFStd_KEY” to fill in the blank of license key, and continue.
Clear the tick on line Volume D and F.
Install deep freeze.
Restart your computer after installation.

Here is all about how to install DAJ2534 JLR142.If you want more detailed installation process you can click here .

Copy Protected by Chetan's WP-Copyprotect.