New GENIUS Ktouch ECU programmer V5.005.003 Test OK and fail report

(Tested) NEW GENIUS Ktouch ecu programmer is working good…worth buy, but you need to do checksum before insert in genius. Following parts are about test ok & fail, how to (instruction), download, issues and solutions. Hope this collection guide others who are think it is risky to buy this GENIUS.

Tested on:

Simos 18 tested ok. Don’t know about simos 12

Tested on many cars Kline an Can and work 100% fine only checksum need to do manually

All simos,denso mitsu ..all ok


I have kess2 clone, ktm, ktag, this would of bin nice as its portable.

obd only write med17.5.2. and 17.5.21 (not tested)


Tested on tricore edc17c10 all ok

EDC17C64 ID & WRITE ok (1.6TDI)
MED17.5.5 ID & READ & WRITE ok
ME7.5 ID & READ & WRITE ok
MED17.5.21 ID & WRITE ok
Sagem 3000 ID & READ & WRITE ok
Opel ME7.6.2 ID & READ & WRITE ok
Mercedes EDC16C2 ID & READ & WRITE ok
Simos 12 & 18 ID & WRITE ok
Checksum recalculated with Genuine Race Evo software for all of my tunes.
2014 Ford Fiesta Ecoboost 1.0 125hp auto
-> Read ok
-> Write ok
2013 Mitsubishi ASX/Outlander Sport 2.0 4B11 CVT
-> Read ok
-> Write ok
2014 Chevrolet Orlando 1.8 Petrol Auto
-> Read ok
-> Write ok
2015 Mitsubishi Montero Sport/Pajero Sport 2.5DiD 178hp auto
-> Read ok
-> Write ok

Can make Opel Zafira , Combo , Meriva Denso ECU

Tested psa edc17c10 read on boot and test write by obd ok


No support Toyota


Here is PCB Board

genius pcb board

Step to use new genius to remap.

1 read data thoug obd and save file to device
2 connect with k touch program and export file to pc
3 use genfile extract ( ori genius file ) before tuning
4 after tuning import file to device with ktouch program and write to car

5 And select work and programing on your genius


How to get the token reset button on genius?

(Tested) Press and hold switch, apply power, waited 10 seconds pulled power out and removed clip. power up and 30



Upload the content of New genius CD for this tool.


For xp user download:


For win7 user download:

Firstly download

Then download application “raceloc.dll” which is used to solve the Fatal error.

English version raceloc.dll
Copy Raceloc.dll to C:\Users\PC Name\AppData\Local\DimWare\RaceEVO\7.0

Race evo uses setting files in order to work. And you need valid license and hasp dongle in order to open the editor.


Issues and solutions:


Device work ok. Read file ok. But do not export file to computer. do not export file to edit and tuning. software do not working dsmanager not working. Runsoftware windows error “fetal error in race 2000 loc”




Aftercompleted setup, you need to manually replace raceloc.dll C:\Users\Your PC Name\AppData\Local\DimWare\RaceEVO\7.0

Fatal Error with be solved.

Instead of installing old version of race evo software, i have installed the latest.
Now there are more realistic results about this tool.
As you can see in pictures, firmware on the device IS 5.005 and available protocols now display correctly on the k-touch software.

genius 2


Latest race evo Software + k-touch with instructions



How to edit the file read with the NEW GENIUS china by WinOLS ?? how to remove the header to be recognized with the WinOLS and ecm Titaniun?

Solution: no need to extract the headder
when you extract files form k touch to pc and it asks you if you want a headder just say yes
and it does not put a header.
if you say NO then it puts headder


Done, hope it helps.

Copy Protected by Chetan's WP-Copyprotect.