Quickly 4C/4D/46/48 Auto Key Programmer Operation Guide

This is Quickly 4c 4d 46 48 chip key programmer operation guide.

Requirement:
Quickly 4C/4D/46/48 Chip Transponder

Open “Quickly>>bde”.
Quickly 4c 4d 46 48 chip key programmer operate -1
Quickly 4c 4d 46 48 chip key programmer operate -2
Quickly 4c 4d 46 48 chip key programmer operate -3

Extract the zip file “CDM v2.12.06 WHQL Certified”.
Use the USB cable to connect Quickly code reader to your laptop.

Right “Computer” for “Manage”.
Device Management>> Other device
Right click “USB<-> Serial” for “Update Driver Software”.
Browse my computer for driver software.
Browse the folder “CDM v2.12.06 WHQL Certified” in “Quickly”. Click “OK”. Click “Next”.
Quickly 4c 4d 46 48 chip key programmer operate -4
Installing driver software…
Successfully updated your driver software for usb serial converter. Click “Close”.

Again, right click “Other device>>USB Serial Port” for “Update Driver Software”.
Browse my computer for driver software.
Browse the folder “CDM v2.12.06 WHQL Certified” in “Quickly”. Click “OK”. Click “Next”.
Installing driver software…
Successfully updated your driver software for usb serial port. Click “Close”.
Select “Ports (COM & LPT)>>USB Serial Port (COM4)”, then minimize the interface.

Open “Quickly>>KKL>>KKL”.
Select “Setup” from the top menu, and “COM: COM4”, then to click “Connect”.
Quickly 4c 4d 46 48 chip key programmer operate -5
Select “Transponder” from the top menu, and click “HITAG2”. Then close it.
Quickly 4c 4d 46 48 chip key programmer operate -6
Then you can read the menu (Main, Database, Special, EEPROM…) in detail.

Done.

Copy Protected by Chetan's WP-Copyprotect.