(Update) Free download VVDI2 V1.2.6 support VAG 4th IMMO ID48 copy

(Dec 7th, 2016) Xhorse VVDI2 update notice: VVDI2 V1.2.6 support VAG 4th IMMO ID48 copy function is released! Below are VVDI2 V1.2.6 free download link and detailed update information for you.



Free download Xhorse VVDI2 Commander Key Programmer V1.2.6:



VVDI2 Programmer V1.2.6 Update Information:

Require firmware V2.2.5
VAG V1.2.6

  1. Support copy 48 transponder, without binding condor(Menu->Key Learn->4th Immobilizer system – Copy 48 Transponder)
    About copy 48 function on VVDI2:
    (1). Authorize copy 48 function require 1000 remote points, require buy an extra emulator
    (2). You can exchange it with “Transponder Programmer -> Menu -> Points System”
    (3). Every success calculation will cost 100 remote points
    (4). Copy 48 function use in 4th immobilizer system (Dashboard), support type: NEC24C32, NEC24C64, NEC24C64 color display, A1, A3/TT/R8, Q3, New Tiguan 5ND920873B, 5ND920883B etc
    (5). Copy 48 function can work on the car that which support read PIN and CS via OBDII. Of course, known CS and PIN is supported. Support make new key, support add keyless GO keys, especially support lost all key
    (6). For Passat B6/CC only support clone 48 transponder(must have working key), don’t support 46 transponder, don’t support keyless Go, don’t support lost all key1.About points on VVDI Key TOOL, you can combine to your VVDI2 device and used in VVDI2
    In future, points will have more power function, save as more as you can!
    2. Fixbug for old A6/Q7 J518 read EEPROM bug
    3. Bugfix

    BMW V1.2.6

  2. BugfixPorsche V1.2.6
  3. BugfixPSA V2.0.7
  4. BugfixTransponder Programmer V1.2.6
  5. Points system: Fixbug for verify sub-remote PCB status
    2. Bugfix
Copy Protected by Chetan's WP-Copyprotect.