BMW Multi Tool V7.7 is a very professional BMW CAS key programmer with multi-function:
1. It includes forth parts, hardware device, dongle, programmer, software.
2. Before running software you must connect dongle and hardware device to computer
3. Get free Encrypted BMW CAS4
It is powerful than BMW AK300. BMW Multi Tool is updated frequently, for more and new function. V7.6 Multi Tool CAS key programmer now can support key programming for BMW CAS1 CAS2 CAS3 CAS3+ CAS4 till year 2014 via OBD2 port directly.
Note: The software displayed is the Chinese version V7.3
You can download the latest version from: http://down.worldobd2.com/bmw-multi-tool-7.6.zip.
1. Use the tool to open the door.
2. Connect the vehicles to BMW OBD.
Warning: Make sure connect dongle to compute before run the software.
3. Run OBD software “BMW Multi Tool V7.6”.
4. To access the main interface, click on the “connection”.
5. When the connection is successful, the vehicle information will be displayed on the screen.
Click “key learning” at the bottom right corner.
6. Enter the key programming interface, and click “get the key information”.
Click “add key” and go on.
Note: CAS1- CAS3 add key and all key lost operating modes are the same.
7. The key frequencies show here 315Hz and the key code is 38422.
Use condor 007 enter code: 3842 (=38422). (It is use when doing machine’s key.)
Note: Before recording the video, a key has made, so the system shows: key 3.
8. The system prompt: Remove the key. If it is a smart key, take out the car.
Click OK for the system prompt to continue.
9. If you do all key lost(CAS1-CAS3), DO NOT insert the key to the ignition switch.
10. The key information was read out.
All the key information was read out here. Pls. save it!
11. Select the key position and then click “use dealer key for programming”.
12. Choose OK to put the key into programming.
13. Again choose OK to strictly follow the prompt: put a new key to the coil of the programmer.
14. The dealer key make it.
15. Insert the key into the ignition switch and try to start.
16. When the vehicle stars successfully, start processing the key.
17. Enter the database and select BMW model in the automatic key cutting machine.
Note: This CONDOR XC-007 Master Series key cutting machine is out of stock now for it is too heavy that it is not convenient to ship and use it. Our factory succeeded developing a mini version of condor xc-700 master series—iKeycutter CONDOR XC-MINI Master Series Automatic Key Cutting Machine.
You can go to www.worldobd2.com to get the mini version in a few days.
This is all about doing BMW X1 All Key Lost with the newest Multi Tool V7.6 for BMW OBD2 CAS1-3+ key programmer.